Product classification
European series separable cable connector
Classification:
European series detachable cable connector
Product accessories:
Product Introduction
Overview
● European series of separable cable connectors are designed and manufactured in strict accordance with DIN47636, EN20180NEN50181 standards, and pass the type test items specified in the IE60502.4 standard in strands, and can be compatible with all casings, plugs or females that meet DIN47636, EN50180, and EN50181 standards. Row equipment can be installed with or interchangeably installed. 100% through visual inspection and electrical performance testing before leaving the factory to ensure consistent and reliable quality of the products shipped.
Executive standard
● EN50181-1997 excluding liquid-filled transformers for equipment with 1kV to 36kV and 250A to 1.25kA insertion bushings
● DIN47636 outer cone sleeve type instrument connector for power cable socket assembly accessories
● IEC60502 rated voltage above 1kV (Um=1.2kV) to 30kV (Um=36kV) extruded insulated power cable and its accessories
● IEC61442 rated voltage 6kV (Um=7.2kV) to 30kv (Um=36kV) power cable accessories test method
● GB12706-2008 rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV) extruded insulated power cable and accessories
● GB311.1-1997 Insulation coordination of high-voltage transmission and distribution equipment
● GB/T4109-1999 High-voltage bushing technical conditions
● GB11032-2000 AC gapless metal oxide surge arrester
630A shielded/unshielded detachable cable front/rear connector
application
● Through the expansion connection with the 630A prefabricated cable front connector, the single-phase or three-phase cable can be connected to the network with multiple inlets and outlets of other electrical equipment such as switch cabinets, transformers, and cable distribution boxes.
● Suitable for indoor or outdoor installation.
● Maximum system working voltage: 24kV
● Continuous rated current: 630A.
● Extendable connection type rear connector or HBLQ type arrester to realize multi-channel installation or provide over-voltage protection.
● Cable characteristics:
-Extruded insulated power cables (XLPE, EPR, etc.)
-Cable conductor section: 35~40mm2
-Cable conductor type: copper core or aluminum core.
characteristic
● When matched with suitable plug-in heads, fully shielded and fully sealed detachable connections can be provided
● Can be used under water or harsh environment for a long time
● No minimum phase separation distance requirement
● Can be installed horizontally, vertically or at any angle
● Can be touched with electricity, safe for humans and animals
● Optional with capacitance test point
Previous Page
Beijing DongFang Realpower
Service Hotline:
R & D Center:
808, Floor 8, Building 3, Yard 8, Automobile Museum East Road, Fengtai District, Beijing
010-83711730
