Product classification
Cable distribution box
Classification:
Cable Distribution box
Product accessories:
Product Introduction
Overview
The cable distribution box is a cable engineering equipment widely used in power distribution network systems in recent years. Its main characteristics are two-way door opening, use of butt sleeves as connection busbars, small length, clear cable arrangement, and three-core cables. Significant advantages such as large-span crossover are required, and the cable joints used meet the DIN47636 standard. Generally, a fixed connection type cable connector with a rated current of 630A is used.
Adapt to the environment
● Ambient temperature: highest temperature: +40°C, lowest temperature -30°C
● Wind speed: equivalent to 34m/s (not more than 700Pa)
● Humidity: The average daily relative humidity is not more than 95%
● The average monthly relative humidity is not more than 95%
● Anti-vibration: horizontal acceleration is not more than 0.4m/s2, vertical acceleration is not more than 0.15m/s2
● Installation site inclination: not more than 3°
● Installation environment: The surrounding air should not be significantly polluted by corrosive, flammable gas, water vapor, etc.
● The installation site does not vibrate severely
Grounding protection box
● The protective grounding box is equipped with an insulation layer inside the box to insulate it from the outside;
● The metal bracket in the box, the surface is all hot-dip galvanized, does not rust, and has a long life;
● It is equipped with an automatic heating temperature control system. When the temperature in the box is lower than the set temperature, the heating device can be automatically started, and the heater automatically stops working when the temperature in the box reaches the set temperature;
● The control temperature can be set independently.
Previous Page
Beijing DongFang Realpower
Service Hotline:
R & D Center:
808, Floor 8, Building 3, Yard 8, Automobile Museum East Road, Fengtai District, Beijing
010-83711730
